Inspection Of Safety System; Inspecting The Safety System - Husqvarna Rider 13 Workshop Manual

Inspecting the safety system

The Rider is equipped with a safety system that
prevents starting or driving under the following
conditions:
The engine should only be possible to start when
the cutting unit is in its raised position and the
hydrostat pedals are in the neutral position.
The driver does not need to be seated in the
driver's seat.
Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
N
Rider 11
1
2
Rider 13, Rider 16
Check that the engine stops if you temporarily move
out off the driver's seat while the cutting unit is
lowered or the hydrostat pedals are not in the
neutral position.
Start engine
Ignition system
Electrical system
Works
Does not work
61
English –