Husqvarna Rider 13 Workshop Manual page 10

Delivery and dealer service
Dealer service
25 hours service
1. Change the engine oil on the side-valve engine
(With high load and temperature on the
overhead-valve engine).
2. Clean/replace the airfilter's pre-filter or oil-foam
element, if fitted. (More frequent intervals in
dusty operating conditions.)
3. Clean/replace the air filter's filter cartridge (25
hours, 100 hours if pre-filter is fitted).
(More frequent intervals in dusty operating
conditions.)
4. Check the tyre pressures.
5. Check the mower deck (visual inspection)
6. Lubricate the belt tensioner.
7. Lubricate joints and axles.
8. Adjust the brake (Rider 11).
9. Check the V-belts.
10. Clean the engine's cooling air intake.
11. Check/clean the hydrostatic transmission
gear's cooling fins.
50 hours service
1. Carry out 25 hours service as above.
2. Change engine oil.
3. Check the oil level in the transmission.
(Rider 13, 16).
4. Check/adjust the parking brake.
(Rider 13, 16).
5. Check/adjust the throttle wire.
6. Clean the cooling fins on the engine and
transmission.
7. Check/adjust the settings on the mowing deck.
8. Inspect the flame guard/spark arrester.
(extra equipment)
8
– English
100 hours service
1. Carry out 25 hours service as above.
2. Carry out 50 hours service as above.
3. Replace the pre-filter and filter cartridge in the
air filter.
4. Replace the fuel filter in the pipe.
5. Clean/replace the spark plug.
300 hours service
1. Inspect the machine. Reach agreement with the
customer about which additional work should be
carried out.
2. Carry out 25 hours service as above.
3. Carry out 50 hours service as above.
4. Carry out 100 hours service as above.
5. Check the valve clearance on the engine.
At least once a season
1. Change the engine oil (25/50 hours).
2. Replace the pre-filter in the air filter.
3. Replace the filter cartridge in the air filter.
4. Check/adjust the settings on the mowing deck.
5. Adjust the parking brake.
6. Inspect the flame guard/spark arrester (extra
equipment).
7. Clean/replace the spark plug.
8. Replace the fuel filter in the pipe.
9. Clean the cooling fins on the engine and trans-
mission.
10. Check the valve clearance on the engine.
11. 300 hours service should be carried out by an
authorised service workshop.