Optional Support Services; Appendix A: Out-Of-Band Management Port; Oobm Availability; Applications Supported With Oobm Port - HP ProCurve 6600 Switch Series Technical Overview

Procurve 6600 switch series
Hide thumbs Also See for ProCurve 6600 Switch Series:
Table of Contents

Advertisement

Optional support services

In addition to free support services such as the warranty and telephone support, HP networking offers an
extensive range of fee-based support services to meet more specialized needs . The following optional services
are available for the ProCurve 6600 Switch Series:
• Onsite next business day
• Onsite in four hours, same business day
• Onsite in four hours 24 x 7
• Six-hour call-to-repair
• 24 x 7 telephone support
HP also can provide more broad-based services such as site surveys, installation services, and actual
management of the network, depending on customer needs .
More information can be found at
HP networking sales office .

Appendix A: out-of-band management port

The out-of-band management (OOBM) interface provides an 10/100 Ethernet-based isolated management
interface to access the switch via SNMP, HTTP, SSH, and Telnet . As a truly isolated port, it is not connected to
the switching fabric and runs an IP stack that is separate from the in-band data plane . In a typical deployment,
the OOBM port should be connected to an isolated management network, both physically and logically, to
provide better security and allow for remote, lights-out management of the network . Figure A-1 highlights the
typical use model for an Ethernet out-of-band management network .
Management/
ILO LAN

Figure A-1: Out-of-band management use model

OOBM availability

The OOBM port is available on 6600-48G, 6600-48G-4XG, and 6600-24XG products and is enabled using
K . 1 4 .32 code or later .

Applications supported with OOBM port

The following applications are supported with the OOBM port: SSH, Telnet, TFTP, HTTP, SNTP, RADIUS,
TACACS, DNS, syslog, ping, and traceroute .
www.hp.com/rnd/services/index.htm
or by contacting a local
Data LAN
sFlow collector
Applications supported over OOBM
SSH, Telnet, TFTP, HTTP, SNTP, RADIUS, TACACS,
DNS, syslog, ping, and traceroute
Limitations
• sFlow must be captured in-band
• IPv6 host capabilities, LLDP, and ACLs are not
yet available
• Separate IP stacks for OOBM and InBand so
DNS resolution is separated for each IP stack
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents