AEG BS9304001 User Manual page 14

14
Daily use
Navigating the menus
Operation of the menus:
1. Activate the appliance.
2. Rotate the shuttle clockwise or counterclockwise to select the menu option.
Press OK to move to submenu or accept the setting.
3.
At any time you can get back to the main menu with
Activating a heating function
1. Activate the appliance.
2. Select the Heating Functions menu. Press OK to confirm.
3. Set the heating function. Press OK to confirm.
4. Set the temperature. Press OK to confirm.
Press to go directly to the Heating Functions menu. You can also use it when the appli-
ance is deactivated.
Steam cooking
The water drawer cover is in the control panel.
1. Press the cover to open the water drawer.
2. Fill the water drawer with 800 ml of water.
The water supply is sufficient for approximately 50 minutes.
Do not put water directly in the steam generator.
Use only water as the liquid. Do not use filtered (demineralised) or distilled water.
3. Activate the appliance.
4. Set the steam heating function (refer to the "Heating functions" table) and the tem-
perature.
5. If necessary, set the function Duration
The first steam shows after approximately 2 minutes. An acoustic signal sounds when
the appliance is at approximately the set temperature. The signal sounds again at the
end of the cooking time.
heating function
Plate Warming
Steam Reheating
Eco Roasting
Application
To preheat your plate for serving.
To reheat your already cooked food directly on a
plate.
The ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables
with the equivalent usual heating function.
.
or End Time .