Download Print this page

Paging Feature; Follow-Me Displays; Changing The Pager Follow-Me Phone Number - Honeywell OMNI-408 User Manual

Fbii security system
Hide thumbs

Advertisement

Your installer may have programmed your system to send messages
with certain system conditions to your pager. An explanation of those
messages is provided below.

Follow-Me Displays

The display shown on your pager is "ACCTEXXX" where:
"ACCT" is the 4-digit central station no. 2 account number.
"E" is the event code. There are 4 event types: alarms, troubles,
openings, and closings. These event codes are as follows:
Openings = 0, Closings = 1, Alarm or Trouble = 9
If multiple events occur, the signal for the highest-priority event is sent first.
Events ranked from highest to lowest priority are alarms, trouble, openings,
and closings.
"XXX" is, depending on the event, the zone (001-008) or user (001-014)
designation.
USER DESIGNATION

Changing the Pager Follow-Me Phone Number

You can change your pager follow-me phone number as follows if your
installer enabled this feature:
FUNCTION
1-6
User Codes
7
Remote arm/disarm
8
Quick Arm No. 1, Quick Forced Arm No. 2
9-14
Keyfobs

Paging Feature

– 17 –

Advertisement

loading

  Related Manuals for Honeywell OMNI-408

This manual is also suitable for:

Omni-408eu