OPERATION & FEATURES
1.
EASY ACCESS KNOB CONTROL
Knob 1 – Light ON / OFF
a.
Knob 2 – Speed
b.
ii. 2 – Medium speed
iii. 3 – High speed
2.
BAFFLE FILTERS
(2) 14-3/8" x 12-3/4" baffle filters and (2) fillers (30" model only)
a.
(2) 14-3/8" x 12-3/4" baffle filters and (2) fillers (36" model only)
b.
3.
REMOVING THE BAFFLE FILTERS
○ 1
Slide the baffle filter into the hood.
○ 2
Push the baffle filter upward.
○ 3
Slide the baffle filter toward you.
○ 4
Pull the end of the baffle filter downward.
○ 5
Fit into place.
4.
REPLACING LIGHT SET
*NOTE: BE SURE THE LIGHTS ARE NOT HOT*
**Use maximum of 35W Halogen/ 8W LED GU10 Light Bulb**
a.
Unscrew outer light ring counter clock wise.
b.
Outer light ring should drop down along with the light bulb.
c.
Slightly pull the light away from the ring.
d.
Move light to left or right side of the ring.
e.
Twist light bulb counter clock wise to release from socket.
f.
Replace light bulb.
***STEP BY STEP DIAGRAM ON NEXT PAGE***
OPERATION & FEATURES
i. 1 – Low speed
9