Stitch Finger Lever; Change To Coverstitch Table C - Husqvarna Viking HUSKYLOCK S21 User Manual

STITCH FINGER LEVER

The stitch nger lever should be set to N for all standard
overlock sewing. To sew rolled edge you need to retract the
stitch nger by setting the stitch nger lever to R.
When moving the stitch nger lever, be sure to push the
lever as far as it will go in each direction.

CHANGE TO COVERSTITCH TABLE C

For Coverstitch and Chainstitch sewing the Coverstitch table
C should be used.
• Open the front cover.
• Lift the hook (A) to release the cutter cover and pull it
towards you.
• Insert the Coverstitch table by tting the two front pins
(B) into the holes (C) and make sure the hook (D) clicks
into place.
12
N
R
A
B
D
C