Get To Know Your Huskylock™ S; Connect Foot Control And Power Supply - Husqvarna Viking HUSKYLOCK S21 User Manual

CONNECT FOOT CONTROL AND POWER SUPPLY

Foot control to use with this machine:
Type 4C-345B22 for USA/Canada
Type 4C-345G22 for Europe
Type 4C-345G25 for UK
Type 4C-345G23 for Australia
Before plugging your machine in, make sure the voltage is the same
as indicated on the plate under the machine. Speci cations vary from
country to country.
1. Connect the foot control/electric power cord to the socket on the
machine.
2. Plug the power cord plug into the electric outlet.
3. Push the power switch to "ON" to turn on the machine.
4. Press the foot control to start sewing. Use the foot control to adjust
the sewing speed. The harder you press, the faster the machine will
sew. To stop the machine from sewing, remove your foot from the
control.
Note: On the side of the foot control is a speed control slide (A) for selecting full
or half speed. If you press the foot control to the bottom, the machine runs at the
maximum speed set by the speed control slide.
5. Push the power switch to "OFF" to turn off the machine.
Note: When the front cover is open the safety switch is activated and prevents the
machine from sewing, even if the foot control is pressed.
POLARIZED PLUG INFORMATION
(For U.S.A. & Canada Only)
This appliance has a polarized plug (one blade wider than the other). To
reduce the risk of electric shock, this plug is intended to t in a polarized
outlet only way. If the plug does not t fully in the outlet, reverse the
plug. If it still does not t, contact a quali ed electrician to install the
proper outlet. Do not modify the plug in any way.
GET TO KNOW YOUR HUSKYLOCK™
1 – GET TO KNOW YOUR HUSKYLOCK™
1
21
S
A
21 7
S