10-Bay Models - Synology DiskStation DS111 User Manual

10-Bay Models

2U RackStation
No. Article Name
1) Power Button
2) Beep off Button
3) LED Indicators
4) Hard Drive Tray
5) Power Port
6) Fan
7) Console Port & VGA Port
8) USB Port
9) LAN Port
10) RESET Button
11) Expansion Port
---------
1
Synology Expansion Unit is supported on specific models only. Please visit www.synology.com.
14 Chapter 1: Synology DiskStation at a Glance
Location
The Power Button is used to turn Synology RackStation on or off.
Front Panel
To turn off Synology RackStation, press the Power Button and hold it
until you hear a beep sound and the Power LED starts blinking.
The Beep off Button is used to turn off the beep sound of
Front Panel
Synology RackStation.
The LED indicator is used to display the status of the internal disk and
Front Panel the system. For more information, see "Appendix B: LED Indication
Tables" on Page 226.
The hard drive tray is designed for loading the hard drives used in
Front Panel
Synology RackStation.
The power port is where you connect the power cord to
Back Panel
Synology RackStation.
The power fans are built to exhaust waste heat out of the power supply.
The system fans (inside RackStation) are built to exhaust waste heat
Back Panel
out of RackStation. If the fan is not working, the RackStation will "beep"
every few seconds.
This port is used for manufacturing use only.
Back Panel
The Synology RackStation offers USB ports for adding additional
Back Panel
external hard drives, USB printers, or other USB devices.
The LAN port is where you connect RJ-45 cable to
Back Panel
Synology RackStation.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology RackStation.
The Expansion port is used to connect Synology Expansion Unit
Back Panel
Synology RackStation.
Synology DiskStation User's Guide
Based on DSM 3.1
Description
1
to