10-Bay Models - Synology DiskStation User Manual

10-Bay Models

2U RackStation
No.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
---------
1
Synology Expansion Unit is supported on specific models only. Please visit www.synology.com.
14 Chapter 1: Synology DiskStation at a Glance
Downloaded from www.Manualslib.com
Article Name Location
Power Button Front Panel
Beep off Button Front Panel
LED Indicators Front Panel
Hard Drive Tray Front Panel
Power Port Back Panel
Fan Back Panel
Console Port & VGA Port Back Panel
USB Port Back Panel
LAN Port Back Panel
RESET Button Back Panel
Expansion Port Back Panel
manuals search engine
Synology DiskStation User's Guide
Description
The Power Button is used to turn Synology RackStation on or off.
To turn off Synology RackStation, press the Power Button and hold it
until you hear a beep sound and the Power LED starts blinking.
The Beep off Button is used to turn off the beep sound of
Synology RackStation.
The LED indicator is used to display the status of the internal disk and
the system. For more information, see "Appendix B: LED Indication
Tables" on Page 226.
The hard drive tray is designed for loading the hard drives used in
Synology RackStation.
The power port is where you connect the power cord to
Synology RackStation.
The power fans are built to exhaust waste heat out of the power supply.
The system fans (inside RackStation) are built to exhaust waste heat
out of RackStation. If the fan is not working, the RackStation will "beep"
every few seconds.
This port is used for manufacturing use only.
The Synology RackStation offers USB ports for adding additional
external hard drives, USB printers, or other USB devices.
The LAN port is where you connect RJ-45 cable to
Synology RackStation.
1. To restore IP, DNS, passwords for the admin account to default value.
2. To reinstall the Synology RackStation.
The Expansion port is used to connect Synology Expansion Unit
Synology RackStation.
Based on DSM 3.1
1
to