Synology DiskStation DS111 User Manual page 179

Edit Camera and Recording Settings
To edit camera settings:
1 Choose the camera you want to change settings, and click
camera to change its settings.
2 Edit the settings in Device
preference.
3 Click OK to save the changes.
If you edit the camera settings while recording, Surveillance Station will stop recording the current video,
Note:
and generate a new video according to the new settings.
To set the recording schedule:
1 Choose the camera you want to set the recording schedule, and click
2 Click Recording Schedule
3 Click the Continuous Recording
or Motion Detection and Alarm Recording
each day, click the day grid or the hour grid.
4 If you want to cancel selection, click the eraser icon (Delete) and click the grid you want to cancel selection.
5 Click OK to save the changes.
To edit motion detection settings:
1 Select the camera you want to change settings, and click Edit.
2 Select Motion Detection
3 You can live view the camera from the screen on the
shows motion detection status. Green means normal and Red means an event is triggered.
4 Choose either Motion detection by the camera
5 If you select Motion detection by the
size, and Trigger percentage
6 If you select Motion detection by Surveillance
Threshold. The value percentage range is 1 to 99(%)
7 Click Detection Area
179 Chapter 14: Safeguard Your Environment with Surveillance Station
Info, Video, Recording,
in the camera settings.
button, Motion Detection Recording
buttons, then click the grid. To select the entire day or hour in
from the drop down menu.
or
camera, enter the value of
(subject to camera's capability). The value percentage range is 1 to 99(%)
Station, enter the value of
to define the detection area.
Synology DiskStation User's Guide
Edit > Settings. Or you can double-click the
Storage Settings, and Recording Schedule
Edit > Settings.
button, Alarm Recording (A)
Motion Detection window. The bar next to the screen
Motion detection by Surveillance Station (MJPEG
Detection sensitivity, Threshold,
Detection sensitivity
1
.
Based on DSM 3.1
to
button,
only).
Object
1
.
value and