Table of Contents
Advertisement
Run S.M.A.R.T. Analysis
Disk S.M.A.R.T. will help you to examine and report the hard disk status to alert possible disk failures. It is
recommended that you change your disk if errors are detected.
To start S.M.A.R.T. test:
1 Select a disk on the disk list and click
2 Choose any of the following test methods and click Start:
Quick Test
Extended Test
Note:
The exact processing time might vary under different system environment.
3 The latest test results are shown in the
4 Click
Close
to finish.
To check S.M.A.R.T. info:
1 Select a disk on the disk list and click
of your disk.
2 Click
Close
to finish.
Check Disk Info
Here you can see the disk's model name, serial number, firmware version, and total size.
To check disk info:
1 Select a disk on the disk list and click
2 Click
Close
to finish.
57 Chapter 4: Manage Storage Space
S.M.A.R.T.
Test.
Test Result
section.
S.M.A.R.T.
Info. The numbers listed can help you to diagnose the status
Disk
Info.
Synology DiskStation User's Guide
Based on DSM 3.1
Hide quick links:
Advertisement
Table of Contents
