Table of Contents
Advertisement
4 Select a type of layout. If you have selected sequential layout, You can adjust the speed of camera rotation at
the
Interval
drop-down menu.
5 Drag cameras from the camera list to the preferred layout position, or drag cameras back to the camera list to
remove them from the layout.
6 If you have added clients in
from other sources by selecting options from Server.
7 To see a snapshot of the current layout, click Preview. If you would like to set the current layout as the default
page when you enter live view, check
8 To delete an unwanted layout, select from the layout list and click Delete.
9 Click
Close
when finished.
Use PTZ Control
If your camera has PTZ (pan/tilt/zoom) support, you can select a camera and use the
the camera's direction. Clicking on the home button will restore the camera back to its original position. If you
have selected a camera with partial PTZ support, the unsupported functions on the
grayed out.
Note:
1 Depending on the performance of your video card, the live view may not display if the video resolution exceeds the
supported range. Changing the
Management
can sometimes solve the problem.
2 To watch live view of Surveillance Station via internet, please make sure that you have set up proper port
forwarding for MPEG4 streaming ports on your NAS server. Refer to
the range of MPEG4 streaming ports.
3 Audio output requires the following audio format: G.711, G.726, AAC, and PCM.
Use Other Functions
On the
Live View
page, you can also use the following functions.
1
2
3
4
5
6
7
8
1 To digitally zoom in and out, drag the zoom bar or place the mouse over the live view of a selected camera
and then scroll the mouse. You can also zoom digitally by using the scroll button on your mouse, and move by
dragging the picture.
2 To adjust volume, drag the volume bar.
3 To see the corresponding preset or patrol, click on the
184 Chapter 14: Safeguard Your Environment with Surveillance Station
Centralized
Management, you can add cameras from your local DiskStation or
Set as
default. Finally, click Save.
Video Output Module
from
Preset Position
Synology DiskStation User's Guide
Controller
Controller
DirectX
to
OpenGL
at
System
System
>
Advanced
or
Patrol
list.
Based on DSM 3.1
panel to adjust
panel will be
>
Advanced
under
under
Management
for
Hide quick links:
Advertisement
Table of Contents
