Avaya IP Office 2420 User Manual page 28

Display Keys
2420 User Guide
IP Office
Busy - Busy
Sets the extension as being busy.
This function does not require any data entered when programmed. This
function cannot be programmed through the phone by the user.
The Busy key sets the extension as busy to callers. If a forward on
busy number is set, it is followed. Otherwise calls go to voicemail if on or
receive busy tone if internal and ringing if external.
To return the extension from busy, press
[User | Button Programming | Advanced | Busy | Busy]
BusyH - Busy On Held
Switch the users busy on held status on/off.
This function requires data entered when programmed. Enter either 0 for off
or 1 for on. This function cannot be programmed through the phone by the
user.
Pressing BusyH switches the user's 'busy on held' state to either on or
off as indicated by the data value. When on, if the users has a call on hold,
new callers receive busy tone (ringing if analogue) or are diverted to
voicemail if enabled, rather than ringing the user. This also overrides call
waiting indication when the user has a call on hold.
This function is not supported via 2420 display keys.
[User | Button Programming | Advanced | Busy | Busy On Held]
CFrwd - Call Forwarding All (!)
Switch call forwarding on/off and set the forwarding number.
This function can be programmed with or without a target forwarding
number. This function can be programmed through the phone by the user
using an Admin key.
If programmed with a forwarding number, that number is shown next to
CFrwd. Pressing CFrwd switches on forwarding to that number.
If programmed without a forwarding number, when
the user's current forwarding number setting is shown. Change the number
using the telephone keypad and <<<
set as required press Done
When call forwarding is on, CFrwd is shown with a symbol and D
(Diverted) is shown at the top of the display. To switch call forwarding off,
press CFrwd again.
[User | Button Programming | Emulation | Call Forwarding All]
See also:
•
"FwNOn - Forward On No Answer On" on page 36.
•
"FwUOn - Forward Unconditional On" on page 36.
•
"FwdNo - Forward Number" on page 35.
•
"FwdH+ - Forward Hunt Group Calls On" on page 35.
ClrCW - Clear CW
Clears the current connected call and connects any waiting call.
This function does not require any data entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing ClrCW disconnects the extension's current call and connects
any waiting call.
[User | Button Programming | Advanced | Call | Clear CW]
Busy and then
to backspace. When the number
.
40DHB0002USEG - Issue 1 (29/04/2003)
Page 28
.
CFrwd is pressed,
Page 28