Print Quality Problems - HP 600 User Manual

Problem
You cannot store a document in
memory.
Blank areas appear at the bottom of
each page or on continuation pages,
with only a small strip of material
printed at the top.
Image TCR is not working

Print quality problems

Problem
Light or blurred characters.
Smudged or dark characters.
Characters with white lines.
Improperly formed or misaligned
characters.
Abnormal black horizontal lines
Solution
There may not be enough memory available to hold the
document you want to store. If the display shows a Memory
Full message, do the following until you can store your
document in memory:
Print all unprinted faxes in memory (see Reprinting faxes on
page 44.
Delete unneeded polling faxes, broadcast faxes, or delayed
faxes (see To cancel the scheduled job on page 38).
You may have selected the wrong paper size setting. To
select the proper paper size, see Paper Size on page 13.
You have the resolution set to SUPER FINE. Set the resolution
to FINE.
Solution
Check ink level as described in View ink level on page 47. To
install a new print cartridge, see Replace the print cartridge
on page 48.
Make sure the print cartridge is installed correctly. To clean
the print cartridge, see Maintain the print cartridge on
page 52.
Make sure the paper is straight and unwrinkled. Let ink dry
before handling the paper. To clean the print cartridge, see
Maintain the print cartridge on page 52.
If Ink Low. Install new ink cartridge is displayed,
install a new print cartridge as described in Replace the print
cartridge on page 48.
Remove and reinstall the print cartridge.
Clean the print cartridge (see Maintain the print cartridge on
page 52).
Clean the print cartridge (see Clean the print cartridge on
page 52).
Clean the cartridge carrier (see Clean the cartridge carrier
contacts on page 53).
Troubleshooting
Care and maintenance 61