Connecting Your Router - Billion BiPAC 7401VP User Manual

VoIP/(802.11g) ADSL2+ Router

Connecting your router

1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.
4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.
5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack.
(802.11g is not supported in BiPAC 7401VP)
Switching/
HUB
ADSL Phone
ADSL
Splitter
Line
Analog Phone
Connect more
computers
11
Chapter 3: Basic Installation