Stamina 55-1527C Owner's Manual page 12

OPERATIONAL INSTRUCTIONS
USING THE INVERSION TABLE
1. Check the decline angle before using the INVERSION TABLE. To increase the decline, lengthen the
straps. To decrease the decline, shorten the straps.
WARNING: DO NOT ALLOW table to invert past vertical. Table inverting past vertical may result in table
contacting frame, damage to table and serious injury to user due to fall hazard. Prior to each
use, make sure nylon and buckle straps are securely attached, as instructed in Steps 9 and
10. Adjust straps to desired angle of inversion, making sure that Main Frame does not strike
Front Frame at any time during use, as shown in illustration below.
Not Past Vertical
NOTE: There must always be
a gap between the Main Frame
and the Front Frame when in use.
12
Past Vertical