Table of Contents
Advertisement
Available languages
Available languages
Operating the product
Same phrase will appear on the display
C
if you press any button when Child Lock
is enabled.
To deactivate the Child Lock:
Press and hold 2
and 4
nd
buttons for 3 seconds. "COFF" appears on the
display.
Do not forget to disable the child lock
C
at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.
5.18 Cancelling the programme
Press and hold Start / Pause / Cancel button for 3
seconds. Start symbol flashes. Symbol of the step
at which the programme was cancelled remains lit.
"End" appears on the display and the programme
is cancelled.
If you want to open the loading door after
C
you have cancelled the programme but it
is not possible to open the loading door
since the water level in the machine is
above the loading door opening, then
turn the Programme Selection knob to
Pump+Spin programme and discharge
the water in the machine.
5.19 Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol illuminates
when the machine is in Rinse Hold mode.
If you want to spin your laundry when the machine
is in this mode:
Washing Machine / User's Manual
Auxiliary Function
th
Adjust the spin speed and press Start / Pause /
Cancel button. Pause symbol disappears and Start
symbol appears. Programme resumes, discharges
the water and spins the laundry.
If you only want to drain the water without
spinning:
Just press Start / Pause / Cancel button. Pause
symbol disappears. Start symbol appears.
Programme resumes and discharges the water
only.
5.20 End of programme
"End" appears on the display at the end of the
programme. Symbols of the programme steps
remain lit. Auxiliary function, spin speed and
temperature that were selected at the beginning of
the programme remain selected.
27 / 36 EN
Advertisement
Table of Contents
