Changing The Selections After Programme Has Started; Cancelling The Programme - Beko CMXD 9100 User Manual

3. Pull down the loading door emergency
handle with a tool and release. Then
open the loading door.
4. If the loading door does not open then
repeat the previous step.
6.12 Changing the Selections After
Programme has Started
Adding laundry after the programme has
started:
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments.
The door lock icon on the display goes off
when the door lock is deactivated. After
adding garments, close the door and press
Start/Pause button once again to resume
the washing cycle.
If the water level in the machine is not suit-
able when you press Start/Pause button,
the door lock cannot be deactivated and
the door lock icon on the display remains
on.
If the temperature of the water in-
side the machine is above 50°C,
you cannot deactivate the door lock
for safety reasons, even if the water
level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the
machine to pause mode. Pause symbol will
flash on the display.
Changing the programme selection after
programme has started:
The programme change is allowed when
the current programme is running unless
the Child Lock is enabled. This action will
cancel the current programme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary function se-
lection"
You can also change the speed and tem-
perature settings. See ''Spin speed selec-
tion" and "Temperature selection".
The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.

6.13 Cancelling the Programme

The programme is cancelled when pro-
gramme selection knob is turned to a dif-
ferent programme or machine is turned off
and on again using the programme selec-
tion knob.
EN / 30