Table of Contents
Advertisement
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Model G0758 (Mfd. Since 2/14)
Inventory (figure 6)
a. handwheel handles w/screws ................... 3
b. Bottle for oil ............................................... 1
c. toolbox ....................................................... 1
D. drill Chuck arbor r-8 x B-16 ...................... 1
E. standard screwdriver ................................. 1
f.
phillips screwdriver .................................... 1
G. spindle pin ................................................. 1
h. open-end Wrench 8/10mm ........................ 1
I.
open-end Wrench 12/14mm ...................... 1
J.
open-end Wrench 17/19mm ...................... 1
K. drill Chuck 3–16mm w/Chuck Key ............. 1
L. t-Bolt M8-1.25 x 55 assemblies ................. 2
M. hex Wrenches 2.5, 3, 4, 5, 6mm ...... 1 each
a
B
d
F
e
g
K
figure 6. inventory included with machine.
Qty
C
h
i
J
l
M
-13-
Advertisement
Table of Contents
