Table of Contents
Advertisement
3.USEFUL FUNCTIONS
Erasing black frames around images
You may want to scan originals with the original cover left open especially when they are as small as a drivers license or
as thick a book as a dictionary. In this case, the open cover admits light to the Original Glass surface, producing a scan
image with a black outer frame. This black frame can be erased using the Outside Erase feature.
[ON] — Select this option to enable the Outside Erase feature. Pressing the button makes the Range Adjustment slider
available.
[OFF] — Select this option to disable the Outside Erase feature.
RANGE ADJUSTMENT — Use
between the image and outer frame. The higher the level, the more area is erased.
The sensitivity level for detecting images and the outer frame can be changed for each job using the control panel.
Regardless of the settings, this feature is disabled under the following conditions:
- The Document Cover is closed at the time of scanning.
- The originals are scanned from the Reversing Automatic Document Feeder*.
Set the appropriate exposure manually. Enabling Outside Erase cancels the automatic exposure adjustment
feature.
P.48 "Adjusting exposure"
The feature may not produce an appropriate output when your original contains a concave shaped image with a
dent.
The margins may not be erased correctly under the following conditions:
- Light intrudes into the margin area of the original placed on the Original Glass.
- Hands or fingers holding the original on the Original Glass are scanned.
*
The Reversing Automatic Document Feeder is optional.
and
to select the appropriate sensitivity from 7 levels to detect the boundary
OFF
Changing Scan Settings
3 USEFUL FUNCTIONS
ON
47
Advertisement
Table of Contents
