2 BASIC OPERATION
6
Select the desired file destination from the list.
1) Select the file destination.
2) Press [OK].
If FTP, NetWare IPX, NetWare IP or FTPS is selected for the file destination, proceed to Step 9.
If SMB is selected for the file destination, proceed to Step 7.
If your desired file destination has not been registered in the equipment, press [DIRECT INPUT] and proceed to
Step 8.
7
If SMB is selected for the file destination, select the folder to be stored.
1) Select the folder to be stored.
2) Press [OK].
Proceed to Step 9.
18
Scan to File