Oki ES9160 MFP/ES9170 MFPES9460 MFP Scanning Manual page 29

2.BASIC OPERATION
9
Specify the following items as required, and then press [OK].
 FRAGMENT MESSAGE SIZE (KB)
Select the size of message fragmentation. If the size of the attached file exceeds that selected here, the equipment
transmits the file by dividing the data into smaller blocks.
If the data size of the e-mail exceeds the maximum allowed for transmission, the attached file will not be sent.
The maximum data size for e-mail transmission can be set by the administrator on the TopAccess SMTP Client
page.
 [FROM ADDRESS]
Press this button to edit the sender's e-mail address. You cannot edit the box if the administrator sets the sender's
e-mail address so that it cannot be edited.
 [FROM NAME]
Press this button to edit the sender's name.
 Pressing [FROM ADDRESS] or [FROM NAME] displays an on-screen keyboard. Enter each item using the
keyboard and digital keys, and press [OK] to set the entry.
 You can start sending your scans on the above screen by pressing the [START] button on the control panel.
10
Press [SCAN] or the [START] button.
 To scan 2-sided documents or change settings such as Color Mode and Resolution, press [SCAN
SETTING].
 P.40 "Changing Scan Settings"
 For the ES9460 MFP/ES9470 MFP/CX3535 MFP/CX4545 MFP, press [PREVIEW] and then [SCAN] to
preview the scanned data.
 P.50 "Previewing Scans"
 To set other scan functions, press [e-FILING], [FILE] or [USB]. (Dual Agents)
 P.66 "Scanning With Dual Functions (Dual Agents)"
2 BASIC OPERATION
Scan to E-mail 27