Adding And Connecting The Ip Cameras; Adding The Ip Cameras - HIKVISION DS-9000HFI-ST User Manual

User Manual of Digital Video Recorder

2.2 Adding and Connecting the IP Cameras

This Chapter is available for HDVR series only.

2.2.1 Adding the IP Cameras

Purpose:
HDVR can connect the network cameras and record the video got from them. So before you can get a live view
or record of the video, you should add the network cameras to the connection list of the device.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of the network,
please see Chapter 9.1 Configuring General Settings, Chapter 9.3 Checking Network Traffic and Chapter 9.4
Network Detection.
Steps:
1. Enter the Camera Management interface.
Menu > Camera> Camera
In Analog Camera Management interface, the status of analog cameras is displayed. Clear the checkboxes,
and you can disable the corresponding analog cameras. One more network camera can be added by
disabling one analog camera. 16 /8 /4 network cameras can be added to DS-9016&8016
HFI-ST&9016HFI-RT&9016HFI-XT&9016HWI-ST/9008&8008HFI-ST&9008HFI-RT&9008HWI-ST/9
004&8004HFI-ST&DS-9004HFI-RT&9004HWI-ST series at most when all the analog cameras are
enabled. 32 /16
HFI-ST&9016HFI-RT&9016HFI-XT&9016HWI-ST/9008&8008HFI-ST&9008HFI-RT&9008HWI-ST/9
Figure 2. 9 Main Menu
/8 network cameras
34
can be added to DS-9016&8016