HIKVISION DS-9000HFI-ST User Manual page 41

User Manual of Digital Video Recorder
2. There are 16 custom protocols provided in the system. Select a custom protocol from the drop-down list,
and configure its corresponding parameters.
Before customizing the protocol for the network camera, you have to contact the manufacturer of the
network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream.
The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path].
Example: rtsp://192.168.1.55:554/ch1/main/av_stream.
•
Protocol Name: Edit the name for the custom protocol.
•
Enable Sub-stream: If the network camera does not support sub-stream or the sub-stream is not
needed, leave the checkbox empty.
•
Type: The network camera adopting custom protocol must support getting stream through standard
RTSP.
•
Transfer Protocol: Select the transfer protocol for the custom protocol.
•
Port: Set the port No. for the custom protocol.
•
Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
3. Click Apply to save the settings and click OK exit.
After added successfully, the custom protocol will be displayed in the drop-down list of protocol on the
Custom Adding interface.
40