HIKVISION DS-9000HFI-ST User Manual page 21

User Manual of Digital Video Recorder
5
A Button
6
REC Button
7
PLAY Button
8 INFO Button
9
VOIP/MON Button
10
MENU Button
11
PREV Button
12
DIRECTION/ENTER
Buttons
13
PTZ Button
14
ESC Button
15 RESERVED
16
F1 Button
17
PTZ Control Buttons
18
F2 Button
Remote Control Troubleshooting:
Adjust focus in the PTZ Control menu.
It is also used to switch input methods (upper and lowercase alphabet,
symbols and numeric input).
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a PTZ
preset by pressing Numeric button.
It is also used to turn audio on/off in the Playback mode.
The button is used to enter the Playback mode.
It is also used to auto scan in the PTZ Control menu.
Reserved for future usage.
Switch main and spot output.
In PTZ Control mode, it can be used to zoom out the image.
Press the button will help you return to the Main menu (after successful
login).
Press and hold the button for 5 seconds will turn off audible key beep.
In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable).
In Playback mode, it is used to show/hide the control toolbar.
Switch single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction with
the A/FOCUS+ button.
The DIRECTION buttons are used to navigate between different fields
and items in menus.
In the Playback mode, the Up and Down button is used to speed up and
slow down recorded video. The Left and Right button will select the
next and previous record files.
In Live View mode, these buttons can be used to cycle through
channels.
In PTZ control mode, it can control the movement of the PTZ camera.
The ENTER button is used to confirm selection in any of the menu
modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will advance the
video by a single frame.
In Auto-switch mode, it can be used to stop /start auto switch.
Enter the PTZ Control mode.
In the PTZ Control mode, it is used to adjust the iris of the PTZ camera.
Back to the previous menu.
Press for arming/disarming the device in Live View mode.
Reserved for future usage.
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if applicable).
In Playback mode, it is used to switch play and reverse play.
Buttons to adjust the iris, focus and zoom of a PTZ camera.
Cycle through tab pages.
In synchronous playback mode, it is used to switch channels.
20