HIKVISION DS-9000HFI-ST User Manual page 26

User Manual of Digital Video Recorder
No. Item
1 VIDEO IN
2 LOOP OUT
(for
DS-9100/9000HFI-ST/RT/XT
& 9200/9100/9000HWI-ST
series)
3 VIDEO SPOT OUT
4 VIDEO OUT
5 AUDIO OUT
6 LINE IN
7 AUDIO IN
8 AUDIO IN
(for
DS-9100/9000HFI-ST/RT/XT
& 9200/9100/9000HWI-ST
series)
9 RS-232 Interface
10 VGA
11 HDMI
12 eSATA
13 LAN Interface
14 Termination Switch
RS-485 Interface
15 Controller Port
DS-8100/8000HWI-ST
Figure 1. 6 Rear Panel (1)
Table 1. 6 Description of Rear Panel (1)
Description
BNC connector for analog video input.
BNC connector for video loop output.
BNC connector for video output.
BNC connector for video output.
RCA (for DS-9200/9100/9000 series) / BNC (for DS-8100/8000
series) connector for audio output. This connector is synchronized
with VIDEO OUT.
RCA (for DS-9200/9100/9000 series) / BNC (for DS-8100/8000
series) connector for two-way audio.
RCA (for DS-9200/9100/9000 series) / BNC (for DS-8100/8000
series) connector for audio input.
DB26 connector for audio input.
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output and
menu.
HDMI video output connector.
Connects external SATA HDD, DVD-R/W.
Network interface.
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
Connector for RS-485 devices. T+ and T- pin connects to R+ and R-
pin of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first DVR's D+, D- pin should be connected with the
D+, D- pin of the next DVR.
25