Table of Contents
Advertisement
Understanding the printer menus
Print Settings
Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
Print Area
Normal
Whole Page
Resource Save
On
Off
Finishing menu
Use
Sides (Duplex)
1 sided
2 sided
To
Set the default printer language.
Notes:
•
PCL Emulation is the factory default printer language.
•
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Set the logical and physical printable area.
Note: Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
job that requires more memory than is available.
Notes:
•
Off is the factory default setting. This sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
•
On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38] appears, and downloads are not
deleted.
To
Specify whether two‑sided (duplex) printing is set as the user default setting for all
print jobs.
Notes:
•
"1 sided" is the factory default setting.
•
You can set two‑sided printing from the software program.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the print dialog and
pop‑up menus.
133
Advertisement
Table of Contents
