Embedded Web Server Does Not Open - Lexmark XM1135 User Manual

Troubleshooting
Action
Step 7
Increase the scan resolution settings for a higher‑quality output.
Did the increased resolution produce a higher‑quality output?
Partial document or photo scans
Action
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
Is the document or photo loaded correctly?

Embedded Web Server does not open

Action
Step 1
a
Turn on the printer.
b
Open a Web browser, and then type the printer IP address.
c
Press Enter.
Does the Embedded Web Server open?
Step 2
Make sure the printer IP address is correct.
a
View the printer IP address:
•
From the TCP/IP section in the Network/Ports menu
• By printing a network setup page or menu settings page, and then
finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
b
Open a Web browser, and then type the IP address.
Note: Depending on the network settings, you may need to type
"https://" instead of "http://" before the printer IP address
to access the Embedded Web Server.
c
Press Enter.
Does the Embedded Web Server open?
Yes No
Problem solved. Contact
support.
Yes No
Contact customer Load the document or
support. photo facedown on the
scanner glass in the
upper left corner.
Yes No
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
232
customer