Mounting The Monitor - HP Compaq TFT 2025 User Manual

Mounting the Monitor

1. Remove the monitor base. Refer to "Removing the Monitor
Base" steps in the previous section.
When the base is removed, four threaded mounting holes are
exposed on the monitor panel to be used for mounting
purposes. These mounting holes are spaced 100 mm apart
and are compliant with the Video Electronics Standards
Association (VESA) standard for mounting flat panel
displays.
2. Mount the monitor to a swing arm or other mounting fixture
by following the instructions included with the mounting
fixture to be used.
User's Guide
2025 Flat Panel Display
9