Turning On The Monitor; Mounting The Monitor Head - HP HC241 User Manual

Turning on the monitor

1. Press the power button on the computer to turn it on.
2. Press the power button on the front of the monitor to turn on the monitor.
IMPORTANT:
or more consecutive hours. To avoid burn-in damage, always activate a screen saver application or turn off
the monitor when it will not be in use for a prolonged period. Image retention is a condition that may occur on
all LCD screens. A burned-in image on the monitor is not covered under the HP warranty.
NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To
disable this feature, press and hold the monitor power button for 10 seconds.
NOTE: You can disable the power LED in the OSD menu. Press the
to open the OSD menu. In the OSD menu select Power Control, select Power LED, and then select Off.
When the monitor is first turned on, a monitor status message displays for five seconds. The message shows
which input is the current active signal, the current preset display resolution, and the recommended preset
display resolution.
The monitor automatically scans the signal inputs for an active input and uses that input for the monitor.

Mounting the monitor head

The monitor head can be attached to a stand using the HP Stand Kit, product number 4BX37AA (sold
separately) or to a wall or other mounting fixture.
NOTE: This apparatus is intended to be supported by a UL Listed or CSA Listed wall-mount bracket.
CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a third-
party mounting solution to the monitor, four 4 mm, 0.7 pitch, 10 mm-long screws are required. Longer screws
may damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant
with the VESA standard and is rated to support the weight of the monitor head. For best performance, use the
power and video cables provided with the monitor.
Burn-in damage may occur on all monitors that display the same static image on screen for 12
Menu button on the front of the monitor
Setting up the monitor 11