HP TFT7600 User Manual

HP TFT7600 User Manual

Rackmount keyboard and monitor
Hide thumbs Also See for TFT7600:

Advertisement

HP TFT7600 Rackmount Keyboard and Monitor

User Guide

Part Number 365378-002
August 2007 (Second Edition)

Advertisement

Table of Contents
loading

Summary of Contents for HP TFT7600

  • Page 1: User Guide

    HP TFT7600 Rackmount Keyboard and Monitor User Guide Part Number 365378-002 August 2007 (Second Edition)
  • Page 2 © Copyright 2005, 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP...
  • Page 3: Table Of Contents

    Maintenance ... 19 Maintenance and shipping guidelines... 19 Cleaning the monitor ... 19 Shipping the TFT7600 RKM... 20 Moving a rack with the TFT7600 RKM installed... 20 Specifications ... 21 TFT7600 RKM specifications... 21 Environmental temperature requirements (independent of altitude)... 21 Regulatory compliance notices ...
  • Page 4 Power cord statement for Japan... 26 Material disposal ... 26 Electrostatic discharge ... 27 Preventing electrostatic discharge ... 27 Grounding methods to prevent electrostatic discharge ... 27 Technical support... 28 HP contact information ... 28 Acronyms and abbreviations... 29 Index... 30 Contents 4...
  • Page 5: Introduction

    1U = 1.75 inches or 44.45 cm The TFT7600 RKM is mounted on rails with space available to add a 1U KVM switch box behind the unit. The TFT7600 RKM can be used with all HP 5000 and 10000 Series racks.
  • Page 6: Components

    Pushes down to unlatch the display assembly Blue LED Turns on when the display is closed Helps identify the HP TFT7600 in a rack OSD scroll up and down Used to scroll in the OSD button menu and adjust functions...
  • Page 7: Rear Components

    Middle pick button Right pick button Scroll bar USB pass thru Pass thru to the rear USB port (callout 1 in the following figure) Function Connects to a KVM switch virtual media port Enables user to update TFT7600 firmware Introduction 7...
  • Page 8: Installation

    This kit contains extra hardware for your convenience. Installing the HP TFT7600 RKM Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap them into place. Snap one end of the HP 1U Adjustable Toolless Rails into the Retma rails.
  • Page 9 Extend the inner slides until they lock into place. Align the unit with the extended inner slides, inserting the unit into the rack. Installation 9...
  • Page 10 Slide the brace rail assembly in between the HP 1U Adjustable Toolless Rails from the rear of the rack. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolless Rails. Secure the brace rail to the HP 1U Adjustable Toolless Rails with two 6-32 screws.
  • Page 11 Remove the two shipping screws from the rear of the HP TFT7600 and discard the screws. Attach the cable management arm to the rear of the unit with two 6-32 screws, supplied in the kit. Installation 11...
  • Page 12: Accessing The Tft7600 Rkm

    Gently extend the TFT7600 RKM until the slides lock. Push the display release latch then lift the display. Removing the HP TFT7600 RKM To remove the TFT7600 RKM, reverse the order of the steps listed in the Installing the HP TFT7600 RKM (on page 8) section. Installation 12...
  • Page 13: Removing The Hp 1U Adjustable Toolless Rails

    Removing the HP 1U Adjustable Toolless Rails Locate the spring release. Place your hand on the outside of the HP 1U Adjustable Toolless Rails so that you can move the spring release. Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable Toolless Rails out toward you and away from the rack (2).
  • Page 14 Slide it back to release the locking mechanism and gently pull to remove the cable. Installation 14...
  • Page 15: Operational Overview

    Operational overview On-screen display The OSD buttons are used to operate the TFT7600 RKM OSD menus. Reference number Launching OSD menu To launch the OSD menu: Press the OSD activation button on the front panel. The main menu displays on the screen.
  • Page 16: Osd Menu

    Press the OSD activation button to select the Exit function and exit the OSD menu. OSD menu The OSD menu provides access to different display settings and functions, enabling the user to customize the HP TFT7600 display settings. Brightness/Contrast The Brightness/Contrast option contains the following options:...
  • Page 17: Advanced

    Vertical position The V position option displays a slider bar to enable the adjustment of the screen's vertical position. The center of the bar is obtained from the factory-preset value for Vertical Position. Clock The Clock option displays a slider bar to enable the adjustment of the Horizontal Clocks. Phase The Phase option displays a slider bar to enable the adjustment of the analog signals phase.
  • Page 18: Auto Configuration

    Auto Clock—Automatically adjusts the output clock per line to match the input Factory settings The Factory settings option enables the user to set the HP TFT7600 back to its original factory settings. The following options are available in the Factory settings menu list:...
  • Page 19: Maintenance

    Maintenance Maintenance and shipping guidelines This section covers maintenance and shipping guidelines for your TFT7600 RKM. To protect your unit from overheating and other types of damage: Use only a power source and connection appropriate for this unit, as indicated on the marking label and back plate.
  • Page 20: Shipping The Tft7600 Rkm

    Keep the original packing box in a storage area in case you must move or ship your RKM. Moving a rack with the TFT7600 RKM installed When moving the TFT7600 RKM installed in a rack, HP recommends that you install the lock plates, included in your kit, on each side of the unit and rack.
  • Page 21: Specifications

    Specifications TFT7600 RKM specifications Item Display size Display type Viewable image size Maximum weight (unpacked) Maximum height Maximum depth Maximum width Resolution Response time Brightness Contrast ratio Environmental temperature requirements (independent of altitude) Item Operating temperature Storage temperature Humidity (Non-...
  • Page 22: Regulatory Compliance Notices

    Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number.
  • Page 23: Declaration Of Conformity For Products Marked With The Fcc Logo, United States Only

    For questions regarding this product, contact us by mail or telephone: Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 1-800-HP-INVENT (1-800-474-6836). (For continuous quality improvement, calls may be recorded or monitored.) For questions regarding this FCC declaration, contact us by mail or telephone: Hewlett-Packard Company P.
  • Page 24: European Union Regulatory Notice

    This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B equipment This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 25: Japanese Notice

    Japanese notice BSMI notice Korean notice Class A equipment Class B equipment Regulatory compliance notices 25...
  • Page 26: Disposal Of Waste Equipment By Users In Private Households In The European Union

    Power cord statement for Japan Material disposal This HP product contains the following material that might require special handling at end-of-life: Mercury in the fluorescent lamp in the display LCD. Disposal of mercury might be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).
  • Page 27: Electrostatic Discharge

    Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices.
  • Page 28: Technical Support

    In other locations, see the Contact HP worldwide (in English) webpage (http://welcome.hp.com/country/us/en/wwcontact.html). For HP technical support: In the United States, for contact options see the Contact HP United States webpage (http://welcome.hp.com/country/us/en/contact_us.html). To contact HP by phone: Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a week.
  • Page 29: Acronyms And Abbreviations

    Acronyms and abbreviations liquid crystal display on-screen display RETMA Radio Electronics Television Manufactures Association (rack spacing) rackmount keyboard monitor thin film transistor universal serial bus Acronyms and abbreviations 29...
  • Page 30: Index

    Phase adjust 16, 17 power cord 26 PS/2 devices 13 regulatory compliance notices 22 Removing the Brace Rail Assembly 13 removing the HP 1U Adjustable Toolless Rails 13 removing the unit 12, 13 shipping the unit 19, 20 Index 30...
  • Page 31 21, 26 technical support 28 telephone numbers 28 Vertical Position 17 website, HP 28 Index 31...

Table of Contents