Advertisement
Advertisement
© Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
NOTE: 1U = 1.75 inches or 4.45 cm The TFT7600 RKM is mounted on rails with space available to add a 1U KVM switch box behind the unit.The TFT7600 RKM can be used with all HP 5000 and HP 10000 Series racks.
Slide the brace rail assembly in between the HP 1U Adjustable Toolless Rails from the rear of the rack. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolless Rails. Secure the brace rail to the HP 1U Adjustable Toolless Rails with two 6-32 screws.
Comments to this Manuals
Latest comments: