Removing Ems Hardware Monitors - HP B6191-90029 User Manual

• HP 9000 Series 700 or 800 Computer
• HP-UX 10.20 or 11.x (Hardware event monitoring is not currently available on the special high security
systems, HP-UX 10.26 (TOS) and HP-UX 11.04 (VVOS).
• Support Plus Media, the more current the better. The hardware event monitors were first distributed in
the HP-UX 10.20/11.00 February 1999 release (IPR 9902). Before the September 1999 release, the
Support Plus Media was called the Diagnostic/IPR Media.
Rather than use the Support Plus Media, you can download the Support Tools (including STM and the
hardware event monitors) over the Web. See Chapter 5 of the Support Plus: Diagnostics User's Guide for
more information
• If you are using MC/ServiceGuard (optional), you must have version A.10.11 on HP-UX 10.20, or version
A.11.04 for HP-UX 11.x.

Removing EMS Hardware Monitors

The hardware monitoring software can be removed using the swremove utility. Run swremove and select the
OnlineDiag bundle. This will remove the hardware monitoring software components and the STM software
components.
Chapter 2
Installing and Using Monitors
Installing EMS Hardware Monitors
29