Connect The Console Or Graphics Monitor - HP 9000 System Installation Manual

2. Connect the Console or Graphics Monitor

1. Console/
If you have an ASCII console (such as the HP 700/96) connect it to the server rear
Keyboard
panel connector labeled Serial 1/ Console. Connect the keyboard to the keyboard
connector at the rear of the console.
2. D3xx Graphics
If you have a D3xx server with a graphics monitor, connect it to the graphics I/O
Monitor,
card at the rear of the system cabinet. Connect the keyboard and mouse to the
Keyboard, Mouse
connectors labeled with keyboard and mouse symbols at the rear of the cabinet.
NOTE
The interface card for the graphics monitor can be installed only in the slot marked
TURBO in the D3xx server (as shown in 2, below). The TURBO slot is not
available for model D310/320/330. Use any open HP-HSC slot..
D Class System Installation
2. Connect the Console or Graphics Monitor
1- 5