Install Internal Add-On Options - HP 9000 System Installation Manual

D Class System Installation

1. Install Internal Add-on Options

1. Install Internal Add-on Options
D Class servers are configured at the factory to include most I/O cards and internal
peripherals.
If you have any internal add-on options, install them now according to the
instructions shipped with the option.
WARNING DO NOT CONNECT SYSTEM POWER CORD AT THIS TIME. If you open
the system cabinet when power is connected, you will be exposed to high-energy
(high-amperage) circuits and possible ejection of molten metal. Be sure to
remove all rings, watches, and other jewelry from fingers, wrists, and arms
before opening the system cabinet.
Electrostatic
If you are installing additional cards or peripherals, you must ensure that they are
Discharge
not damaged due to electrostatic discharge (ESD). To prevent such damage from
Precautions
occurring, observe the following ESD precautions when handling and installing
boards:
1. Use a grounding mat and an anti-static wrist strap. These items are included in
2. Wear the anti-static wrist strap to ensure that any accumulated electrostatic
3. Keep uninstalled printed-circuit boards in their protective anti-static bags until
4. Handle printed-circuit boards by their edges after you have removed them from
1-4
the ESD Field Service Kit (HP P/N A3024-80004).
charge is discharged from your body to ground.
you are ready to install them.
their protective anti-static bags.