Connect Remote Management Card And Serial Data Cable For The Optional Ups - HP 9000 System Installation Manual

R Class System Installation
5. Connect Remote Management Card and Serial Data Cable for the
Optional UPS
5. Connect Remote Management Card and Serial
Data Cable for the Optional UPS
R Class Servers The Remote Management card (also called the Access Port or AP card) is optional
on R Class servers. When present, the AP card is always installed in slot 0.
1. Connect your Line Access Module (LAM), for connecting to the phone line, to
2. If you have a UPS, connect the UPS data cable from the UPS Port on the UPS
2-16
the Modem/LAM connector on the Remote Management (Access Port) card.
to the UPS connector on the Remote Management card.