CalAmp Sentry 4G-900 Operating Manual page 48

(To Remove the last row click the '–' sign. To remove a selected row, mark that row and
click the '–' sign.
3. To assign a service profile to an SS in the list:
Check the radio-button for the first SS to be assigned QoS and click the USF Settings
operation button. The following screen appears.
Select
SF
The screen provides the following interfaces:
•
MAC address of the selected SS
•
List of the available Service Flows
•
Operation buttons for assigning and disassociating service flows from a SS
The following operation buttons are available:
•
Subscribe – used to assign the selected SF to the SS
•
Unsubscribe – used to disassociate the selected SF from the SS
•
Back – go back to the Pre-Provisioned SS screen (to choose another SS).
4. Select an SF row, and click the Subscribe button. The SF is assigned to the SS.
5. Reset the SS- Base Station connectivity:
Resetting the connection of a single SS (in case the SF is applied on a Registration
Base):
•
Click the Subscribers menu option. Choose the Subscriber Management sub-menu
and then the Registered SS.
•
In the displayed Registered SS Information pane select the radio button of the
requested SS and click the Deregister button.
© CalAmp Sentry 4G-900 Pico Base Station 44