CalAmp Sentry 4G-900 Operating Manual page 44

5.2.2.2 Defining Traffic Classifiers for the SF
The Unicast Classifier pane is used to select the traffic to which the SF will be applied. The traffic
can be selected according to various parameter types: traffic source and destination, DSCP and
IP protocol.
Up to four classifiers can be defined for each SF where the data is analyzed according to each of
the classifiers (logical 'OR') assigned to the SF. Each classifier consists of either one or two
filtering values (e.g. traffic source from a specific IP address and a specific Port, DSCP range of
traffic type, etc.), where the classifier is defined according to both (logical 'AND').
To define Unicast SF Classifiers
1. (If you are not already in the Unicast Services pane), access the Unicast Services pane (by
clicking the Subscribers menu option and choosing Services from the sub-menu).
2. Select the relevant SF row and click the Classifiers button. The Unicast SF Classifiers
screen appears.
© CalAmp Sentry 4G-900 Pico Base Station 40