CalAmp Sentry 4G-900 Operating Manual page 45

The following operation buttons are available:
•
Apply – used to apply changes to selected classifier
•
Back – go back to the SF screen (to choose another SF).
3. Click the '+' sign to add a new row.
4. Update the required parameters in the Pane table according to the following descriptions and
click apply to implement the changes for each row.
NOTE: Once the classifier for the SF has been defined, the SF configuration is complete and the SF
can be assigned to the desired SSs.
The following table provides a description of the Classifier types and values. The Type and
Values are the same for Classifier 1 and for Classifier 2.
Field
Index
Classifier Type
1/2
Classifier
Value 1/2
© CalAmp Sentry 4G-900 Pico Base Station
Description
Read Only. Unique number, assigned by the system after applying the
changes.
Type of traffic classifier.
Values:
DSCP Range Mask (DSCP field, providing differentiated services
codepoint.) The DSCP is actually the first six-bits of the TOS (Type of
Service) byte of the IP packet header)
MAC address (Source/Destination);
IP address (Source/Destination);
Port Range (Source/Destination);
IP Protocol (IP header field determining the protocol (TCP/ UDP/...)
The specific traffic-classification value, in accordance to the Classifier
Type 1 field. Below are descriptions and examples of values according to
the classifier type:
For.... Classifier Value
(Classifier
Description
Type)
MAC MAC/Mask
(src/dest)
IP address IP/Mask
(src/dest)
Port port range
Range
(src/dest)
Classifier Value
Example
11:22:33:44:55:66/48 /Mask is optional
192.168.1.1/32 /Mask is optional
1230-1250
Comment
41