Base Station And Asn-Gateway Ip Address; Standalone: Switching Parameters - CalAmp Sentry 4G-900 Operating Manual

3.2

Base Station and ASN-Gateway IP Address

The Base Station and ASN-GW IP addresses and subnet mask are configured via the IP
Addresses pane..
To access the IP Addresses pane
1. Click the Backbone menu option. The Backbone Admin sub-menu list is displayed in the
Sub-Menu option pane.
2. From the Backbone Admin sub-menus choose IP Addresses. The IP Addresses pane is
displayed.
3. Define the required IP and subnet parameters and click Apply.
•
Base Station IP Address
•
Base Station Subnet Mask
•
Base Station Default GW IP Address
4. Restart the service to reset addresses according to the configured values.
3.3

Standalone: Switching parameters

The L2 switching related parameters define the L2 switching method, the MAC addresses table
used by the switching mechanism, and the MAC addresses aging period (after which an unused
MAC that appears in the table is ignored). These parameters are viewed and configured via the
Backbone Switching sub panes.
© CalAmp Sentry 4G-900 Pico Base Station 13