Qos Assignment To Subscribers; Assigning Service Profiles To Subscriber Stations - CalAmp Sentry 4G-900 Operating Manual

5.3

QoS Assignment to Subscribers

After defining the pool of SFs (e.g. for UL A, DL A, UL B, DL B...), these SFs can be assigned to
specific SSs according to QoS requirements.
To do so, define the MAC address of the SSs in the Pre-Provisioned SS screen, and then assign
it the relevant SFs.
After assigning the SFs to a SS, Re-set the connection between the SS and the SF.
Note: Re-setting the connection between the SS and the Base Station is required when applying
any change to an SF that is allocated to that SS.
This section details the required steps for assigning the defined SFs to specific SSs.
5.3.1

Assigning Service Profiles to Subscriber Stations

Subscriber Stations (SS) can be assigned a number of (pre-defined) Service Flows (SFs), where
the combined SFs serve to create the Service Profile for the SS.
To access the Pre-Provisioned SS pane
1. Click the Subscribers menu option and from the Subscriber Management sub-menu
option choose Pre-Provisioned SS. The Pre-Provisioned SS pane appears.
Click to add an
SS MAC
address
2. To add Subscriber Stations to the list:
•
Click the '+' sign. A row is added.
•
Enter the SS MAC Address. The Static MCS (CPE Specific Configuration) will be
displayed.
•
Click Apply.
•
Repeat the procedure for any additional SS to be added to the list.
© CalAmp Sentry 4G-900 Pico Base Station 43