Activating Software Versions - CalAmp Sentry 4G-900 Operating Manual

4.5.1

Activating Software Versions

This pane shows which software versions are currently loaded and provides options for switching
between the main and secondary software versions.
To access the SW Operations pane
1. Click the Admin menu option and then the SW Upgrade sub-menu option. From the SW
Upgrade sub-menus choose SW Properties. The SW Properties pane is displayed.
2. The following information is provided:
•
Current Active Bank - Primary or Secondary.
•
Primary SW version
•
Primary CDC
•
Primary UV
•
Secondary SW version
•
Secondary CDC
•
Secondary UV
•
Service State
3. The following operations can be performed:
•
Run Secondary - Reboot device and load from secondary
•
Set as Primary - Set current running SW as Primary
•
Reboot - Reboot device and load from main
•
Factory Defaults – Restore factory setup
© CalAmp Sentry 4G-900 Pico Base Station 25