Modifying Parameters - CalAmp Sentry 4G-900 Operating Manual

Wireless – Access to all WiMAX parameters configuration
and diagnostics options.
Quick Start – Access to all parameters required for initial
set up of the system, depending on the operation mode
(Standalone / ASN-GW).
2.3.3

Modifying Parameters

Modified parameters are updated on the Base Station under three conditions, depending on the
parameter:
•
Some parameters do not require special operations - simply click Apply and they are
updated on the Base Station.
•
Some parameters affect the service – these are marked by an exclamation mark (!).
To update these parameters, click Stop Service and then Start Service (in the Quick Start
panel).
•
Some parameters are updated after performing system reboot - these are marked by an
asterisk (*).
For parameters that require reboot or service restart, two values are displayed:
•
The current value used by the Base Station.
•
The configured value - typed by the user but not yet updated onto the Base Station. (Will
be updated in the Base Station after the required restart/reboot operation).
See example below.
© CalAmp Sentry 4G-900 Pico Base Station 10