Keep Alive Settings - CalAmp Sentry 4G-900 Operating Manual

3.4.2

Keep Alive Settings

This pane provides configuration options for the keep-alive messages intervals and retries
protocol.
To access the Keep Alive Settings pane
1. Click the Backbone menu option and choose ASN Settings and then Keep Alive Settings
from the sub-menus. The Keep Alive settings pane is displayed.
2. Define the required parameters according to the following descriptions and click Apply.
Field
Keep Alive timeout
(10000..180000) [µs]
Keep Alive Retries (1..10)
Keep Alive Activation
Mode
3. If the Keep Alive Activation Mode has been configured, reboot the Base Station for the
changes to be applied.
© CalAmp Sentry 4G-900 Pico Base Station
Description
This value indicates the time interval (in µSec) that a Base Station
waits for the keep-alive response before keep-alive request re-
transmission.
Max number of keep-alive re-transmissions
Enable / Disable Keep Alive activation.
Values: [True, False]
17