Table of Contents
Advertisement
HARDWARE INSTALLATION
LED Indicator
POWER
The POWER LED will be ON when the unit is powered up
LINK
The LINK LED blinks in green when the 108Mbps Wireless USB Adapter is connected to a network
successfully.
Check the installation
The LED of the 108Mbps Wireless USB Adapter is clearly visible and the status of the network link
can be seen instantly:
1. When connected to the USB port and the driver were installed, the LNK LED will start blinking,
and it means that the device is starting to scan an 802.11g wireless device near the 108Mbps
Wireless USB Adapter.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the WNC-0306USB and is the answer not in the manual?
Questions and answers