Configuration - LevelOne WNC-0306USB User Manual

Configuration

This is the page where you can change the basic settings of the 108Mbps Wireless USB Adapter with
the minimum amount of effort to implement a secure wireless network environment.
SSID: The SSID differentiates one Wireless LAN group name from another; so all access points and
all devices attempting to connect to a specific Wireless LAN group name must use the same SSID. A
device will not be permitted to join the BSS unless it can provide the unique SSID.
Wireless Mode: If you want to connect with an Access Point/WLAN Router, please set to
"Infrastructure" mode. If you have more stations and just want to set them as local network, please
set the mode to "Ad-hoc" mode.
Channel: It shows auto that used for Infrastructure Wireless LAN network. The channel number can
be set only under the Ad-Hoc operation mode. In Ad-Hoc mode stations, each station must have the
same channel number and SSID.
In Infrastructure mode, the Wireless USB Adapter will automatically detect the channel number of the
Access Point.
Power Mode: There are 3 modes to choose:
Continuous Access Mode (default): The USB Adapter is constantly operating with full power
and it consumes the most power.
Maximum Power Save: The USB Adapter consumes the least power and only operates when
there is wireless network activity.
Power Save: The USB Adapter consumes the moderate level of power.
11