Table of Contents
Advertisement
USER'S MANUAL
Chapter 2 Hardware Installation
2.1 Package contents
Please check whether the following items are in your package:
(a) EPC-0100TB 10Mbps Ethernet PCMCIA Adapter.
(b) Media coupler (An UTP cable with RJ-45 connector or a MAU with RJ-45
and BNC connectors).
(c) Driver diskette.
(d) Installation manual.
(e) T-Connector( Optional, for Model with MAU cable)
2.2 Hardware description
The EPC-0100TB's main PCB board is encased in a stainless compact frame
that is easily transportable. It is a 68-pin connector and a 15-pin flat connector
for attaching to the PC and media coupler, respectively.
2.2.1 Media coupler
A media coupler with a RJ-45 connector or a MAU with both RJ-45 and BNC
connectors is available for attaching the card to the Ethernet network and the
other side is a 15 pin flat connector for connecting to the PC card.
2.2.2 LED indicators
If the MAU with RJ-45 and BNC connectors is used then the LEDs shown on
the cover of the MAU will be:
(1) Activity LED:
It can monitor signals transmitted to the network. Its color is green. The
green LED labeled Activity lights up to indicate that the EPC-0100TB is
transmitting signals to the network. This LED is normally off. It will
become steady ON when the card transmits signals to the network.
10
Advertisement
Table of Contents
