Table of Contents
Advertisement
3.3.2 Auto Configuration
If you selected the Auto Configuration, the program will auto detect what the IRQ
and I/O Port the EPC-0100TB can use. After detecting the configuration
successfully, the program will show the following screen.
PCMCIA ETHERNET CARD INSTALLATION
INSTALL program has detected the following configuration
options for your PCMCIA Ethernet Card.
<Enter> to continue
Figure 3.3.2-1 Configuration Information
Fehler! Formatvorlage nicht definiert.
CONFIGURE PCMCIA ETHERNET CARD
IRQ
IO BASE
<F3> to return to DOS
: 5
: 0x300
19
Advertisement
Table of Contents
