Table of Contents
Advertisement
Configuration Page
This is the page where you can change the basic settings of the Access Point with the
minimum amount of effort to implement a secure wireless network environment.
SSID: Service Set Identifier, which is a unique name shared among all clients and
nodes in a wireless network. The SSID must be identical for each clients and nodes
in the wireless network.
Wireless Mode: There are two types available for selection
Infrastructure – to establish wireless communication with LAN and other
wireless clients through the use the Access Points.
Ad-Hoc – to establish point-to-point wireless communication directly with
other wireless client devices such as wireless network PC Card.
AdHoc Band: There are two bands available for selection
11B – allow user to set the 802.11b standard wireless network.
11G – allow user to set the 802.11g (draft) wireless network.
Channel: The value of channel that AP will operate in. You can select the channel
range of 1 to 11 for North America (FCC) domain and 1 to 13 for European (ETSI)
domain and 1 to 14 for Japanese domain.
Tx Rate: Select the data rate for data transmission.
14
Advertisement
Table of Contents
